Long lasting coverage with a lightweight, natural look and feel. You can customize by mixing different shades. The minerals also provide natural non-irritating sun protection (SPF 20 - 25) from two key ingredients: Titanium Dioxide and Zinc Oxide. The minerals are talc-free; salicylate- free; fragrance-free; dye-free and non-comedogenic. So good for your skin, you can sleep with it on. No shine! Also free of harmful ingredients such as: parabens, preservatives, talc, corn starch, dyes 100% pure crushed minerals made with natural ingredients.

NOTE:
  *Light is for light skin with yellow tone complexion
   *Light Porcelain is for light skin with pink tone complexion
  *Fair is for light-medium skin with yellow tone complexion
  *Medium Neutral is for fair skin with neutral or beige tone complexion
   *Medium Golden (yellow) is for yellow undertone skin from light olive to
                 medium olive  complexion
  *Tan is for olive or Hispanic skin with yellow tone complexion
  *Darker shades can be used for golden to darker complexions and as bronzer

Best when used with Kabuki brush.

• Titanium Dioxide, Sericite, Iron Oxides, Ultramarine Blue, Mica
• Titanium Dioxide: Derived from naturally occurring minerals. The FDA lists Titanium Dioxide as one of the purest and most effective ingredients for sun protection.
• Iron Oxides: Iron combined with oxygen creates iron oxides and can be found in nature, pigment.
• Mica: Aids in oil control, translucent, silky to the touch, reflects light, reducing the appearance of pores and wrinkles.
• Zinc Oxide: A naturally occurring mineral, may encourage healing of skin conditions, natural sunscreen
• We exclude the following ingredients from all our loose mineral makeup:
• Dyes
• Lakes
• Carmine
• Synthetic fragrance
• Talc
• Bismuth oxychloride
• Petroleum derivatives
• Sodium lauryl/laureth sulfate
• Methylparaben
• Propylparaben
• UREA
• Aluminum starch octenylsuccinate
• And others

Once you get used to it, Loose Mineral Foundation is very easy to apply.  Within minutes your complexion becomes flawless.  Can be used as both concealer and foundation.

HOW TO USE:
Tap a small amount of powder into the lid of the sifter jar.
If you need to use as Concealer:  Using a concealer brush, work powder into the brush without leaving clumps of powder on the brush, dab lightly on areas you’d like to conceal and blend.  

As Foundation: Swirl your foundation brush (Kabuki) around in the mineral powder. It is important to work the powder deeply into the brush, as this prevents the minerals from going on too heavy. The minerals will be almost invisible on your brush when worked properly into it.
Tap off any excess powder.
Dust the powder across your face.
Remember that mineral makeup is concentrated and you will likely need to use less of it than the foundation you currently use. If you prefer a heavier coverage, you can repeat the process.